![usb serial controller d w10 usb serial controller d w10](https://cdn.sparkfun.com/assets/learn_tutorials/9/0/8/Windows_Device-Manager-COM-Port-CH340.jpg)
- #USB SERIAL CONTROLLER D W10 HOW TO#
- #USB SERIAL CONTROLLER D W10 INSTALL#
- #USB SERIAL CONTROLLER D W10 DRIVER#
- #USB SERIAL CONTROLLER D W10 SOFTWARE#
![usb serial controller d w10 usb serial controller d w10](https://images-na.ssl-images-amazon.com/images/I/51ixxXBitsL._SL1200_.jpg)
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. The loopback test fails when you cannot see what you are typing. When the session is open, anything you type into it you should see.Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. To find out the COM port number, refer to the following FAQ. Open a telnet session on the COM port number of the device that you are testing.If you look closely at the female end, the pins should be numbered. Take a metal paperclip or wire and cross pins 2 and 3.If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
#USB SERIAL CONTROLLER D W10 HOW TO#
See this FAQ on how to perform a RS-232 serial loopback test: Note: Some serial devices work only if the COM port number is between a certain range. If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
#USB SERIAL CONTROLLER D W10 SOFTWARE#
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number. Check to see if your device is listed under Ports (COM & LPT). Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. When you test the serial ports and serial device, it is recommended that you do the following: When you test your cables, it is recommended that you do the following:
![usb serial controller d w10 usb serial controller d w10](http://images.monoprice.com/productlargeimages/37261.jpg)
Ideally, you should test a component that you know works in another setup. Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup. To test your setup components, try the following: You can test to make sure that the following components are working correctly and are not the source of the issue: When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems.
#USB SERIAL CONTROLLER D W10 DRIVER#
Your computer will automatically complete the driver installation and your device should be ready to use.Once Windows has restarted, connect the USB serial adapter to your computer.